|
|
MANLIFT Power has a fleet of 800kVA and 1250kVA generators specifically designed to meet the full demands of our rental clients. Our units can be fully synchronized and our technical team can tailor power requirements to our client’s specific needs. Technical specifications are below:
- Compact 1 MWe container Design for hush operating environment and high ambient temperature conditions.
- Standard module, ISO 20’ container for ease of transportation across borders and regions.
- Dual Frequency and wide voltage range for Continuous / Prime / Standby application.
- Genset powered by Cummins engine model KTA50G3 and Newage alternator model, P7B
|
Performance
- A genuine 1 MWe @ 50 Hz and 1.1 MWe @ 60 Hz.
- The best ratio Power / Compactness on the market for Rental Companies.
- 50 C˚ cooling package capability.
- Use Cummins KTA50G3 very well appreciate for its capability for the high ambient temperature conditions as well as hush environment (fuel quality for instance)
- Dual Frequency and wide voltage range for the mobility of the fleet and flexibility of the application.
|
Generator Set Rating:
- Thorough Factory Testing conducted to validate the performance:
- The generating set is capable to meet the 50 and 60 Hz continuous rating up to the Limiting Ambient Temperature of 50 C˚
- Excellent noise performance. Designed to meet:
- 80 dBA @ 1m for 50Hz @ 75% load.
- 80 dBA @ 7m for 60 Hz @ 75% load.
- Site testing conducted in Dubai with the ambient temperature over 40 C˚
- Performance of the genset set is validated in the factory and site.
|
Performance Table:
| C1250 D2R |
Continuous |
Prime |
Standby |
Ambient Temp |
kVA |
kWe |
kVA |
kWe |
kVA |
kWe |
40 C˚ |
1005 |
804 |
1258 |
1005 |
1400 |
1120 |
45 C˚ |
1005 |
804 |
1258 |
1005 |
1400 |
1120 |
50 C˚ |
1005 |
804 |
1131 |
905 |
1260 |
1008 |
55 C˚ |
938 |
750 |
1025 |
820 |
|
|
- Cooling packages designed to meet Limiting Ambient Temperature of 50 C˚ @ Continuous rating.
- Vertical hot air discharge. Suitable for multiple sets installation.
|
Full Options:
- Standard ISO 20’ container. CSC approved.
- Stackable.
- Durable finish. Sand blast, primer & top coat.
- 4 point lift, side ladder and fork lift slots.
- One large double access doors with air filter at the end of the compartment to service the engine and alternator.
- Lockable side doors with internal release.
- Acoustic louver with air inlet filter to prevent dust and sand ingression.
- 110% internal bunding within the genset compartment, for greater environmental protection.
- Designed to meet the following noise level at free field condition:
- 50 Hz: 80dBA @ 1m under 75% load.
- 60 Hz: 80dBA @ 7m under 75% load.
- Controller accessible from outside.
- Emergency stop button at both sides of the container.
- Side doors access for ease of maintenance & serving.
- Insulated exhaust silencer mounted inside the container with rain cap.
- External topping points for fuel, oil & water.
- Metal flooring.
- Manual oil drain pump.
- 900 litres fuel tank with external gauge.
- Fuel filter with water separator.
- External fuel connection (3-way valve)
- Battery Isolator.
- Charging alternator.
- Added safety features for low coolant level shutdown, low fuel warning & shutdown. Fuel leakage warning.
- Automatic oil top up system with 50 litre lubricating oil tank.
- Electric fuel pump with external connection.
- Water jacket heater.
- Electric sump drain pump.
- AMF module with selector switch.
- Anti-condensation heater.
- Battery charger
|
Our Cummins units are specifically designed to withstand the harshest environments and are backed up by Manlift Power’s advanced servicing and maintenance procedures and full 24hr support.
|